- Locate COMP switch on front of control panel and toggle to mute/ middle position.
- Check if compressor is running by placing hand on compressor to feel for vibration.
Yes, go to #3. No, go to #4. - Check 1/8 inch air tubing for leaks or attachment starting from bottom/rear of control panel to bottom/side of compressor. If detached, reattach. If leaking, tape up and/or call our office at 830-443-4559. After light turns off, toggle COMP switch back to run/up position.
- Reset circuit breaker in control panel labeled comp. Check if compressor is running by placing hand on compressor to feel for vibration.
Yes, go to #5. No, go to #6. - After light turns off, toggle COMP switch back to run/up position.
- If the alarm persists or both alarms are on, contact Lonestar Aerobic Services at (830) 443-4559.
